Colorado Well Finder › Wells by county › Elbert County › Ponderosa Park
Buying land in Ponderosa Park means understanding the Denver Basin well records before you rely on a contractor’s estimate or a seller’s water claims. Nearby permitted wells have a 360-foot median depth, with most falling between 300 and 434 feet. Reported production is generally useful for a household, but the records do not tell the whole story about water quality, legal use, storage, septic suitability, or the cost of reaching a building site.
This page covers permitted wells within five miles of Ponderosa Park, including local depth, yield, water-level, permit, driller, cost, and environmental information. Use it to screen a property, then confirm the specific permit, well construction, water rights, and site conditions before closing or starting construction.
Figures are computed from Colorado Division of Water Resources permit records for permitted wells within 5 miles of Ponderosa Park. Not every permit reports every field; each statistic uses the wells that report it.
| Depth statistic | Feet |
|---|---|
| 25th percentile | 300 |
| Median | 360 |
| 75th percentile | 434 |
| 90th percentile | 611 |
| Deepest on record | 2,318 |
| Aquifer named on permits | Wells |
|---|---|
| Upper Dawson | 2,384 |
| unnamed / fractured-bedrock aquifer | 1,795 |
| Lower Dawson | 752 |
| Yield statistic | gpm |
|---|---|
| 25th percentile | 10.0 |
| Median | 13.0 |
| 75th percentile | 15.0 |
| Median depth to water | 180 ft |
| Median water level by decade | Depth to water |
|---|---|
| 1970s | 144 ft |
| 1980s | 164 ft |
| 1990s | 230 ft |
| 2000s | 215 ft |
| 2010s | 170 ft |
| 2020s | 200 ft |
The local depth data point to a substantial drilling project rather than a shallow well. The median completed depth is 360 feet, and the middle half of reported wells runs from 300 to 434 feet. About 65% of wells are between 300 and 600 feet, while 11% exceed 600 feet. The deepest recorded well reaches 2,318 feet.
All mapped wells are identified with Denver Basin aquifers. The Upper Dawson appears on 2,384 permits, an unnamed or fractured-bedrock aquifer on 1,795, and the Lower Dawson on 752. Those formations can vary substantially across a property. For a drilling bid, use the local median as a planning reference, not a guarantee. Access, casing, grout, geology, and the target aquifer can move the final depth well beyond a simple per-foot estimate.
Among wells with reported pump yields, the median is 13.0 gallons per minute, and the middle half is 10.0 to 15.0 gallons per minute. That is a reasonably strong local production pattern for a household well, although a pump test and the well’s permit conditions matter more than a regional median when evaluating a particular lot.
The yield mix is also encouraging: 72% of reported wells produce between 5 and 15 gallons per minute, and 27% report more than 15 gallons per minute. Only 1% fall between 1 and 5 gallons per minute, with no reported wells under 1 gallon per minute in this dataset. A high yield does not automatically mean unrestricted use. Many permits are domestic or household permits, and an exempt household-use well remains subject to its permitted uses and Colorado water law.
Reported static water levels have a median depth of 180 feet below ground, with the middle half between 125 and 245 feet. That affects pump setting, electrical planning, storage, and the amount of water a driller must lift. Static level is not the same as pumping level, so a buyer should request the well construction report and any available pump-test information.
The decade series does not show a simple, continuous decline. Median depth to water was 144 feet in the 1970s, 164 in the 1980s, 230 in the 1990s, 215 in the 2000s, 170 in the 2010s, and 200 in the 2020s. Measurements come from different wells and years, so this is regional context rather than proof of a changing water table at your parcel.
The records show the heaviest permit activity from the 1970s through the 1990s: 972 permits in the 1970s, 1,172 in the 1980s, and 1,641 in the 1990s. Activity was lower in later decades, with 666 permits in the 2000s, 372 in the 2010s, and 296 in the 2020s. The newest permit year is 2025.
The most active names in these records are Hamacher Well Works Inc (Hamacher, Alan Ray) with 1,046 records, Hier Drilling Co Inc (Hier, Bruce A.) with 853, and Hier Drilling Co. (Hier, Peter J) with 728. These counts describe permit records, not current availability, pricing, or a quality ranking. Verify licensing, insurance, references, and the proposed scope directly before hiring.
For Denver Basin sedimentary bedrock in this area, the drilling model uses $50 to $70 per foot. At the local median depth of 360 feet, that puts the drilled hole at about $18,000 to $25,200. A finished system, including the pump, pressure tank, trenching, and electrical work, is modeled at approximately $24,000 to $37,200.
Treat those figures as a budgeting range, not a fixed quote. A bid can change with the final depth, casing and grout requirements, difficult access, water-level conditions, pump size, trench length, power availability, and the location of the house. Ask the contractor to separate drilling, casing, grouting, development, pump equipment, electrical, trenching, testing, and permit-related work so you can compare bids on the same scope.
Mapped environmental records within about ten miles include 24 PFAS sampling or contamination sites, 2 historic mine features, and 3 EPA Superfund or cleanup sites. That does not establish contamination at a particular parcel, but it is a reason to check the exact location, drainage, prior land use, and available water-quality results. Test the existing well for routine drinking-water concerns and any contaminants suggested by local site history.
Low yield is not the main warning in these records, but dry holes and variable fractured-bedrock conditions remain possible. Confirm casing, grout, wellhead protection, pump performance, and separation from septic components. Before building, have the county and a qualified septic designer review soils, setbacks, reserve area, driveway access, and the proposed house location. Water quantity, water quality, legal use, and septic approval are separate questions.
| Decade permitted | Wells |
|---|---|
| 1950s | 20 |
| 1960s | 95 |
| 1970s | 972 |
| 1980s | 1,172 |
| 1990s | 1,641 |
| 2000s | 666 |
| 2010s | 372 |
| 2020s | 296 |
| Most active drillers on record | Wells |
|---|---|
| Hamacher Well Works Inc (Hamacher, Alan Ray) | 1,046 |
| Hier Drilling Co Inc (Hier, Bruce A.) | 853 |
| Hier Drilling Co. (Hier, Peter J) | 728 |
How this is built: the median permitted depth here times the per-foot range for this ground, plus the normal system costs. A lot at the 75th-percentile depth (434 ft) would run roughly $27,700–$42,380. See the full Colorado well cost guide.
Counts come from EPA, USGS and state datasets layered on the Colorado Well Finder map. A count is not a verdict on any one well; it tells you what to test for.
The numbers above are the area average. Your lot is one point on the map. Search the address to see the real depth, yield and aquifer of each permitted well around it.
Map wells near Ponderosa ParkTri-Lakes Contracting is a licensed Colorado contractor serving Ponderosa Park and nearby Elbert County properties with access driveways, site development, new-build septic systems, and custom homes. They can help coordinate the site work that follows well planning, from access and utilities to the building site.
Licensed Colorado custom home builder · licensed driveway & excavation contractor · licensed septic installer
A listing photo can't tell you whether a lot is a dream or a money pit. Two parcels near Ponderosa Park can carry the same asking price while one needs an $80,000 driveway and a $45,000 engineered septic the other doesn't. The well numbers on this page are the start of that answer. A Tri-Lakes Site Feasibility Report is the rest of it: a licensed general contractor, excavator and septic installer reads the parcel the way we would if we were about to build on it, and puts the real cost in writing before your money is committed.
Spend a little to know. Or gamble a lot to guess. Realtors sell the view and inspectors look at houses that already exist. We're the people who'd build it, so we catch what quietly turns a "great deal" into a budget disaster: bad access, buried rock, steep grade, soil that won't pass for a normal septic, water that's a fortune to reach. And if the lot is good, you've already got a builder ready to do the work, driveway to drywall.
Under contract, comparing parcels, or a realtor with a rural listing whose buyers keep asking "what will it cost to build here?" This is the due-diligence step almost everyone skips, and the one that saves the most.
Driveway, site work, septic or a build near Ponderosa Park. Licensed GC, excavator and septic installer.
Got it. Tri-Lakes will get back to you shortly.
Something went wrong sending that. Email kyle@trilakes.co instead.
Ponderosa Park wells have a median reported depth of 360 feet. The middle half runs from 300 to 434 feet, and 65% are between 300 and 600 feet. About 11% exceed 600 feet, while the deepest recorded well is 2,318 feet. A nearby well is useful evidence, but the target aquifer and exact geology still control the final depth.
The local drilling model uses $50 to $70 per foot. At the 360-foot median depth, the drilled hole is estimated at $18,000 to $25,200. A completed system with pump, tank, trenching, and electrical work is estimated at $24,000 to $37,200. Access, depth, casing, grout, pump requirements, and trench length can change the quote.
Reported wells have a median pump yield of 13.0 gallons per minute, with the middle half between 10.0 and 15.0 gallons per minute. About 72% produce 5 to 15 gallons per minute and 27% exceed 15 gallons per minute. These are reported pump yields, not a promise for a new well or unrestricted water use.
The regional records include 24 PFAS sampling or contamination sites within about ten miles, along with 3 EPA Superfund or cleanup sites. That does not prove a specific well is unsafe. Test the property’s water, review its history and nearby environmental sites, and inspect the wellhead and septic separation before relying on it for household drinking water.
The most active names in the nearby permit records are Hamacher Well Works Inc, including Hamacher, Alan Ray, with 1,046 records; Hier Drilling Co Inc, including Hier, Bruce A., with 853; and Hier Drilling Co., including Hier, Peter J., with 728. Those record counts are not endorsements. Confirm current licensing, insurance, references, and a written scope before hiring.
All wells in Elbert County — county-wide depth, yield and cost figures.
Driveway, septic, site development, feasibility or a custom build near Ponderosa Park.
Shopping a lot? Run the $99 instant buildability check →