Heeney well reference

What Heeney Wells Cost, Produce, and Require

Colorado Well FinderWells by countySummit County › Heeney

Buying land near Heeney means dealing with mountain bedrock, variable well records, and site conditions that can change from one lot to the next. Within 5 miles of Heeney, Colorado, DWR records show 236 permitted wells. Of those, 137 are recorded as constructed, 150 report a total depth, 56 report a pump yield, and 20 report a static water level.

The records are useful for setting expectations, but they are not a guarantee for an unbuilt lot. A neighboring well can show the likely geology and cost range, while a site evaluation, permit review, and experienced driller help determine what your parcel can actually support.

236wells in DWR permit records
135 ftmedian well depth
76–232 ftmiddle half of well depths
8.0 gpmmedian pump yield
90 ftmedian depth to water
2025newest permit on record

Figures are computed from Colorado Division of Water Resources permit records for permitted wells within 5 miles of Heeney. Not every permit reports every field; each statistic uses the wells that report it.

How deep are wells around Heeney?

35% under 100 ft47% 100–300 ft13% 300–600 ft5% 600+ ft
Depth statisticFeet
25th percentile76
Median135
75th percentile232
90th percentile401
Deepest on record1,075
Aquifer named on permitsWells
unnamed / fractured-bedrock aquifer227
Dakota3
Alluvial2

How much water do wells make near Heeney?

4% under 1 gpm14% 1–5 gpm70% 5–15 gpm12% 15+ gpm
Yield statisticgpm
25th percentile5.0
Median8.0
75th percentile10.0
Median depth to water90 ft
Median water level by decadeDepth to water
2020s90 ft

Heeney Well Depths Reflect Fractured Mountain Rock

The median recorded well depth near Heeney is 135 feet. The middle half runs from 76 to 232 feet, which is a practical range to carry into an early drilling estimate. About 35% of recorded wells are under 100 feet, while 47% fall between 100 and 300 feet. Another 13% are between 300 and 600 feet, and 5% reach 600 feet or more.

The deepest well on record is 1,075 feet. That outlier matters because Heeney wells commonly draw from unnamed fractured-bedrock aquifers: 227 permits identify that setting. Granite and gneiss can produce water through fractures rather than a uniform, predictable layer, so depth and production can change substantially across short distances.

Most Heeney Wells Produce a Usable Household Yield

Among the 56 Heeney-area wells reporting pump yield, the median is 8.0 gallons per minute. The middle half produces 5.0 to 10.0 gallons per minute. That is a generally workable range for a household well when the pressure system, storage, and building demand are designed correctly.

Yield is not evenly distributed. Seventy percent of reported wells fall between 5 and 15 gallons per minute, while 12% report more than 15 gallons per minute. Four percent are under 1 gallon per minute, and 14% are between 1 and 5 gallons per minute. A buyer should not treat the median as a promise. Ask for the completion report, pump test information, and any storage-tank plans before relying on a well for a home.

Heeney Water Levels Are Recorded Sparingly

Only 20 wells in the local records report a static water level, so the water-level sample is much smaller than the depth sample. In those records, the median depth to static water is 90 feet, with the middle half between 40 and 130 feet. That helps with pump planning, but it does not establish the water level on every parcel.

The permit totals by decade do not show a water-table trend. They show when permits were issued, not how water levels changed over time. A recent permit year is 2025, and the records include permits from the 1950s through the 2020s. For a specific property, compare nearby completion reports and ask whether the well has a documented static level after it has rested.

Permit History Shows Long Use Around Heeney

Heeney has a long record of domestic well development. The permit counts by decade are 2 in the 1950s, 15 in the 1960s, 21 in the 1970s, 40 in the 1980s, 49 in the 1990s, 37 in the 2000s, 15 in the 2010s, and 21 in the 2020s. Most permits are for domestic or household use, which accounts for 81% of the use mix.

The most active drillers in these records are Golden Eagle Drilling Corporation, associated with Shelton, Joe Wayne, with 40 permits; Buena Vista Drilling, associated with Shelton, William L, with 23; and Arrow Drilling, associated with Berglund, Peter R., with 19. Those records can help identify local experience, but confirm current licensing, availability, and scope directly.

A Heeney Well Can Cost More Than the Hole

Heeney ground is fractured mountain bedrock, including granite and gneiss. The drilling cost model uses a typical rate of $65 to $100 per foot. At the local median depth of 135 feet, the drilled hole is estimated at about $8,800 to $13,500.

A finished well is a larger project. Including the pump, pressure tank, trenching, and electrical work, the modeled total is about $14,800 to $25,500. That range is for the median-depth scenario, not a fixed bid. A deeper hole, difficult access, extra casing or grout, a low-yield well requiring storage, and long utility runs can change the price. Get the drilling scope in writing and ask what happens if the first target does not produce enough water.

Check Water Quality, Yield, and the Building Site

Environmental history deserves a specific review before buying. Within about 10 miles of Heeney, mapped records include 1 PFAS sampling or contamination site, 13 historic mine features, and 1 EPA Superfund or cleanup site. These findings do not prove a private well is contaminated, but they support testing for site-appropriate contaminants and reviewing nearby land uses.

Low yield and dry holes are also real risks in fractured rock. Confirm the well location, access for a rig, expected casing and grout, and the separation between the well, septic system, and proposed building. The permit’s use matters too: 81% are domestic or household wells, while other permits serve stock, irrigation, or monitoring uses. Before construction, verify the DWR permit, septic approval, and any water-right or augmentation requirements that apply.

Well permits by decade near Heeney

Decade permittedWells
1950s2
1960s15
1970s21
1980s40
1990s49
2000s37
2010s15
2020s21
Most active drillers on recordWells
Golden Eagle Drilling Corporation (Shelton, Joe Wayne)40
Buena Vista Drilling (Shelton, William L)23
Arrow Drilling (Berglund, Peter R.)19

What a new well costs in Heeney, CO

Estimated cost of a new well · Heeney, CO · median depth 135 ft
State & county well permit DWR application + county fee
$100–$400
Drilling, casing & grouting 135 ft × $65–$100/ft in fractured mountain bedrock (granite / gneiss)
$8,800–$13,500
Pump, pressure tank & install scales with depth
$3,000–$8,000
Trenching, water line, electrical, water test
$2,100–$8,400
Typical finished total
$14,800–$25,500

How this is built: the median permitted depth here times the per-foot range for this ground, plus the normal system costs. A lot at the 75th-percentile depth (232 ft) would run roughly $21,080–$35,200. See the full Colorado well cost guide.

Environmental sites mapped within about 10 miles

1PFAS sampling / contamination sites
13historic mine features
1EPA Superfund & cleanup sites

Counts come from EPA, USGS and state datasets layered on the Colorado Well Finder map. A count is not a verdict on any one well; it tells you what to test for.

See every well near a specific address in Heeney

The numbers above are the area average. Your lot is one point on the map. Search the address to see the real depth, yield and aquifer of each permitted well around it.

Map wells near Heeney
Building or improving land near Heeney?

Tri-Lakes Contracting

Tri-Lakes Contracting is a licensed Colorado contractor serving Heeney and nearby mountain communities with access driveways, site development, new-build septic systems, and custom homes. Their early site planning can coordinate access, utilities, septic, and construction around the well location.

Licensed Colorado custom home builder · licensed driveway & excavation contractor · licensed septic installer

Buying land near Heeney? Know what it costs to build before you buy the dirt.

A listing photo can't tell you whether a lot is a dream or a money pit. Two parcels near Heeney can carry the same asking price while one needs an $80,000 driveway and a $45,000 engineered septic the other doesn't. The well numbers on this page are the start of that answer. A Tri-Lakes Site Feasibility Report is the rest of it: a licensed general contractor, excavator and septic installer reads the parcel the way we would if we were about to build on it, and puts the real cost in writing before your money is committed.

What the wrong lot can cost you · the things a listing never mentions
Long or steep driveway & access
$25k–$80k+
Rock excavation & extra earthwork
$15k–$60k+
Engineered / advanced septic instead of conventional
+$20k–$40k
Water & long utility runs
$10k–$50k+
A feasibility report
from $99

Spend a little to know. Or gamble a lot to guess. Realtors sell the view and inspectors look at houses that already exist. We're the people who'd build it, so we catch what quietly turns a "great deal" into a budget disaster: bad access, buried rock, steep grade, soil that won't pass for a normal septic, water that's a fortune to reach. And if the lot is good, you've already got a builder ready to do the work, driveway to drywall.

Under contract, comparing parcels, or a realtor with a rural listing whose buyers keep asking "what will it cost to build here?" This is the due-diligence step almost everyone skips, and the one that saves the most.

Tell us about your project

Driveway, site work, septic or a build near Heeney. Licensed GC, excavator and septic installer.

Got it. Tri-Lakes will get back to you shortly.

Something went wrong sending that. Email kyle@trilakes.co instead.

Common questions about wells in Heeney

How deep are wells in Heeney?

The median recorded well depth near Heeney is 135 feet. The middle half of reported depths runs from 76 to 232 feet. About 35% are under 100 feet, and 47% are between 100 and 300 feet. Depth is less predictable in fractured granite and gneiss; the deepest recorded well reaches 1,075 feet.

What does it cost to drill a well in Heeney?

The local drilling model uses $65 to $100 per foot. At the 135-foot median depth, the drilled hole is estimated at $8,800 to $13,500. A finished well with pump, tank, trenching, and electrical work is modeled at $14,800 to $25,500. A deeper hole, difficult access, or low yield can increase the final cost.

How much water do Heeney wells produce?

Among 56 wells with reported pump yields, the median is 8.0 gallons per minute, and the middle half produces 5.0 to 10.0 gallons per minute. Seventy percent are between 5 and 15 gallons per minute. Four percent report under 1 gallon per minute, so buyers should review the actual pump test rather than rely only on the median.

Is well water safe in Heeney?

A private well must be evaluated and tested at the property. Mapped records within about 10 miles include 1 PFAS sampling or contamination site, 13 historic mine features, and 1 EPA Superfund or cleanup site. Those records do not establish contamination in a particular well, but they make water-quality testing and a site-history review important.

Are Heeney wells getting deeper or running lower?

The available records do not establish a dropping water table. Only 20 wells report static water levels, with a median depth to water of 90 feet and a middle half from 40 to 130 feet. Permit counts by decade describe permit timing, not water-level change. For a property decision, compare nearby completion reports and obtain current well information.

Keep researching

More in Summit County

All wells in Summit County — county-wide depth, yield and cost figures.

Nearby areas

Driveway, septic, site work or a build near Heeney?Licensed GC, excavator & septic installer. Tell us what you need — 30 seconds.