Commerce City well records

Commerce City well depths, yields, and drilling costs

Colorado Well FinderWells by countyAdams County › Commerce City

Commerce City sits on the plains, where well records show a wide range of construction conditions. Across permitted wells within 5 miles, the median reported depth is 55 feet, but the middle half runs from 40 to 440 feet. That spread matters when you are pricing a new well or evaluating an existing one.

Reported yields are generally stronger than the depth range suggests: the median is 13.0 gallons per minute, with the middle half between 10.0 and 15.0 gallons per minute. The records include domestic, stock, irrigation, and monitoring wells, so the permit purpose matters when comparing one property with another.

3,466wells in DWR permit records
55 ftmedian well depth
40–440 ftmiddle half of well depths
13.0 gpmmedian pump yield
18 ftmedian depth to water
2025newest permit on record

Figures are computed from Colorado Division of Water Resources permit records for permitted wells within 5 miles of Commerce City. Not every permit reports every field; each statistic uses the wells that report it.

How deep are wells around Commerce City?

57% under 100 ft7% 100–300 ft25% 300–600 ft11% 600+ ft
Depth statisticFeet
25th percentile40
Median55
75th percentile440
90th percentile600
Deepest on record1,514
Aquifer named on permitsWells
unnamed / fractured-bedrock aquifer2,265
Lower Arapahoe328
Arapahoe180

How much water do wells make near Commerce City?

0% under 1 gpm1% 1–5 gpm56% 5–15 gpm43% 15+ gpm
Yield statisticgpm
25th percentile10.0
Median13.0
75th percentile15.0
Median depth to water18 ft
Median water level by decadeDepth to water
1980s70 ft
2010s14 ft
2020s16 ft

Commerce City well depth depends on the local formation

The 55-foot median is not a safe assumption for every Commerce City lot. Half of the wells with reported depths fall between 40 and 440 feet, 25% are between 300 and 600 feet, and 11% exceed 600 feet. The deepest record reaches 1,514 feet.

Most reported wells, 57%, are under 100 feet, while 7% fall between 100 and 300 feet. Another 25% are between 300 and 600 feet. This pattern suggests that nearby wells can provide useful direction, but not a guaranteed bid depth. Permits identify wells in the Denver Basin aquifer system, including the unnamed or fractured-bedrock aquifer, Lower Arapahoe, and Arapahoe formations. A driller still needs to evaluate the specific lot and intended use.

What Commerce City wells produce

Among the 646 records reporting pump yield, the median is 13.0 gallons per minute. The middle half produces 10.0 to 15.0 gallons per minute, and 43% report more than 15 gallons per minute. Another 56% fall between 5 and 15 gallons per minute.

No reported wells are under 1 gallon per minute, and 1% are between 1 and 5 gallons per minute. That is encouraging for a buyer, but it does not replace a yield test or a review of the well permit. A household well also needs the right pumping equipment, storage, and water treatment. An exempt household-use well is generally subject to the 35 gallon-per-minute pumping limit, even though the recorded well yield may be higher.

Water levels around Commerce City

The reported static water level has a median of 18 feet below the surface, with the middle half between 10 and 65 feet. For a new well, that relatively shallow water level can affect pump selection, trenching, and how the driller plans casing and grout.

The decade figures do not show a simple dropping water table in these records. The median measured depth to water was 70 feet in the 1980s, 14 feet in the 2010s, and 16 feet in the 2020s. These measurements come from only 133 wells, and the wells, locations, and conditions may differ. Treat the series as local historical context, not a guarantee of the water level on a particular Commerce City parcel.

Commerce City permit history and local drillers

Commerce City has a long permit history. The records show 160 permits from the 1950s, 182 from the 1960s, 325 from the 1970s, 502 from the 1980s, 662 from the 1990s, 446 from the 2000s, 254 from the 2010s, and 158 from the 2020s. The newest permit year is 2025.

Those records include 3,466 permitted wells, with 2,038 recorded as constructed. The most active drillers named in the records are Authorized (Pe, Pg), Roger Schocke Well Drlg. Inc. (Schocke, Roger), and Boyles Bros. Drilling Co. (Lensch, George E). A historical permit may identify construction details, but confirm the current well condition, pump, electrical service, and legal use before relying on it.

What a new Commerce City well may cost

For Denver Basin sedimentary bedrock, the drilling model uses a typical rate of $50 to $70 per foot. At the local median depth, that puts the drilled hole at about $2,800 to $3,800. That is only the hole, not the complete water system.

A finished well with pump, pressure tank, trenching, and electrical is modeled at about $8,800 to $15,800 at the median depth. A property needing a much deeper hole can exceed that range. Ask a driller what is included in the written bid: casing, grout, development, pump testing, permits, wiring, trenching, storage, and water treatment can materially change the total. A neighboring well log is useful for planning, but it cannot lock in the price.

Commerce City risks to check before closing

Low yield is not the main pattern in the reported records, but a permit history is not a promise that every lot will produce 13.0 gallons per minute. Dry holes, deeper-than-expected drilling, poor construction, and pump problems remain possible. Have an existing well inspected and test its production, static water level, and water quality.

Environmental review also deserves attention. Mapped sites within about 10 miles include 463 PFAS sampling or contamination sites, 30 EPA Superfund or cleanup sites, and 1 historic mine feature. A site map does not prove that a parcel's water is contaminated. It does mean you should obtain a certified laboratory test and check nearby land uses. Confirm septic setbacks, soil suitability, drainfield space, and the building envelope before buying or designing the home.

Well permits by decade near Commerce City

Decade permittedWells
1950s160
1960s182
1970s325
1980s502
1990s662
2000s446
2010s254
2020s158
Most active drillers on recordWells
Authorized (Pe, Pg)353
Roger Schocke Well Drlg. Inc. (Schocke, Roger)179
Boyles Bros. Drilling Co. (Lensch, George E)178

What a new well costs in Commerce City, CO

Estimated cost of a new well · Commerce City, CO · median depth 55 ft
State & county well permit DWR application + county fee
$100–$400
Drilling, casing & grouting 55 ft × $50–$70/ft in Denver Basin sedimentary bedrock
$2,800–$3,800
Pump, pressure tank & install scales with depth
$3,000–$8,000
Trenching, water line, electrical, water test
$2,100–$8,400
Typical finished total
$8,800–$15,800

How this is built: the median permitted depth here times the per-foot range for this ground, plus the normal system costs. A lot at the 75th-percentile depth (440 ft) would run roughly $28,000–$42,800. See the full Colorado well cost guide.

Environmental sites mapped within about 10 miles

463PFAS sampling / contamination sites
1historic mine features
30EPA Superfund & cleanup sites

Counts come from EPA, USGS and state datasets layered on the Colorado Well Finder map. A count is not a verdict on any one well; it tells you what to test for.

See every well near a specific address in Commerce City

The numbers above are the area average. Your lot is one point on the map. Search the address to see the real depth, yield and aquifer of each permitted well around it.

Map wells near Commerce City
Building or improving land near Commerce City?

Tri-Lakes Contracting

Tri-Lakes Contracting is a licensed Colorado contractor serving Commerce City with access driveways, site development, new-build septic systems, and custom homes. Bring the well, septic, driveway, and building-site decisions together before construction starts.

Licensed Colorado custom home builder · licensed driveway & excavation contractor · licensed septic installer

Buying land near Commerce City? Know what it costs to build before you buy the dirt.

A listing photo can't tell you whether a lot is a dream or a money pit. Two parcels near Commerce City can carry the same asking price while one needs an $80,000 driveway and a $45,000 engineered septic the other doesn't. The well numbers on this page are the start of that answer. A Tri-Lakes Site Feasibility Report is the rest of it: a licensed general contractor, excavator and septic installer reads the parcel the way we would if we were about to build on it, and puts the real cost in writing before your money is committed.

What the wrong lot can cost you · the things a listing never mentions
Long or steep driveway & access
$25k–$80k+
Rock excavation & extra earthwork
$15k–$60k+
Engineered / advanced septic instead of conventional
+$20k–$40k
Water & long utility runs
$10k–$50k+
A feasibility report
from $99

Spend a little to know. Or gamble a lot to guess. Realtors sell the view and inspectors look at houses that already exist. We're the people who'd build it, so we catch what quietly turns a "great deal" into a budget disaster: bad access, buried rock, steep grade, soil that won't pass for a normal septic, water that's a fortune to reach. And if the lot is good, you've already got a builder ready to do the work, driveway to drywall.

Under contract, comparing parcels, or a realtor with a rural listing whose buyers keep asking "what will it cost to build here?" This is the due-diligence step almost everyone skips, and the one that saves the most.

Tell us about your project

Driveway, site work, septic or a build near Commerce City. Licensed GC, excavator and septic installer.

Got it. Tri-Lakes will get back to you shortly.

Something went wrong sending that. Email kyle@trilakes.co instead.

Common questions about wells in Commerce City

How deep are wells in Commerce City?

The median reported well depth near Commerce City is 55 feet. The middle half of reported depths ranges from 40 to 440 feet, while 11% are deeper than 600 feet. The deepest record is 1,514 feet. That wide range reflects different uses, locations, and formations, so nearby well logs are more useful than the median alone when estimating a new well.

How much does it cost to drill a well in Commerce City?

The local drilling model uses $50 to $70 per foot in Denver Basin sedimentary bedrock. At the 55-foot median depth, the drilled hole is estimated at about $2,800 to $3,800. A finished system with pump, tank, trenching, and electrical is modeled at about $8,800 to $15,800. A deeper hole or added treatment can increase the final cost.

How much water do wells produce in Commerce City?

The median reported pump yield is 13.0 gallons per minute, and the middle half ranges from 10.0 to 15.0 gallons per minute. Records show 43% producing more than 15 gallons per minute. No reported wells are under 1 gallon per minute, but a buyer should still verify the specific well with a production test and pump inspection.

Is well water safe in Commerce City?

Safety cannot be determined from the well permit or yield. Within about 10 miles, mapped records include 463 PFAS sampling or contamination sites and 30 EPA Superfund or cleanup sites. Those locations do not prove contamination at a particular property. Test the well through a certified laboratory, review nearby land uses, and retest after ownership or construction changes.

What should I check before buying a home on a Commerce City well?

Review the DWR permit, construction record, pump equipment, production, static water level, and recent laboratory results. Of 3,466 permitted wells in the area, 2,038 are recorded as constructed, so permit status and field condition are not the same thing. Also confirm septic setbacks, drainfield space, legal use, and the building site before closing.

Keep researching

More in Adams County

All wells in Adams County — county-wide depth, yield and cost figures.

Nearby areas

Driveway, septic, site work or a build near Commerce City?Licensed GC, excavator & septic installer. Tell us what you need — 30 seconds.