Colorado Well Finder › Wells by county › Garfield County › Chacra
Buying land near Chacra means evaluating the well record along with the house, road, septic system, and building site. Permit data within five miles shows generally shallow wells, strong reported yields, and a water level that is often close to the surface. The records are useful for planning, but they are not a guarantee for an unbuilt lot.
Of 486 wells in the Colorado Division of Water Resources records, 216 are recorded as constructed. Only 274 report total depth, 95 report pump yield, and 35 report static water level. That uneven reporting matters: use the local pattern to budget and ask questions, then confirm the specific parcel with a driller and the state permit file.
Figures are computed from Colorado Division of Water Resources permit records for permitted wells within 5 miles of Chacra. Not every permit reports every field; each statistic uses the wells that report it.
| Depth statistic | Feet |
|---|---|
| 25th percentile | 56 |
| Median | 85 |
| 75th percentile | 160 |
| 90th percentile | 232 |
| Deepest on record | 2,203 |
| Aquifer named on permits | Wells |
|---|---|
| unnamed / fractured-bedrock aquifer | 475 |
| Alluvial | 8 |
| Mancos | 3 |
| Yield statistic | gpm |
|---|---|
| 25th percentile | 12.0 |
| Median | 15.0 |
| 75th percentile | 15.0 |
| Median depth to water | 20 ft |
| Median water level by decade | Depth to water |
|---|---|
| 2020s | 54 ft |
The median reported well depth near Chacra is 85 feet, with the middle half between 56 and 160 feet. That gives a driller a reasonable starting range, but not a firm bid. A deeper result is still possible: the 90th percentile is 232 feet, and the deepest recorded well is 2,203 feet.
The depth mix is favorable for shallow drilling. Fifty-eight percent of reported wells are under 100 feet, while 36% fall between 100 and 300 feet. Five percent are between 300 and 600 feet, and none are recorded above 600 feet in that mix. Local ground includes mixed sedimentary and alluvial material, while most permits name an unnamed or fractured-bedrock aquifer. Rock changes, alluvial thickness, casing, and grout requirements can move a final price well beyond a simple depth calculation.
Among the 95 wells reporting pump yield, the median is 15 gallons per minute, and the middle half ranges from 12 to 15 gallons per minute. Sixty-nine percent report more than 15 gallons per minute. Twenty-six percent fall between 5 and 15 gallons per minute, and 4% fall between 1 and 5 gallons per minute. No reported well is under 1 gallon per minute.
Those figures suggest that a typical completed well may support ordinary household use, but yield is not the same as guaranteed daily supply. Pump testing, storage capacity, water pressure equipment, and the legal use allowed by the permit all matter. A buyer should request the well construction and pump records rather than relying only on a neighboring result.
The median static water level is 20 feet below ground, with the middle half between 12 and 66 feet. That is a relatively accessible water level for drilling and pump installation, but it also means construction details deserve attention. Casing and grout need to protect the borehole from surface water, especially where drainage, irrigation, or septic systems are nearby.
The available record does not provide a water-level series by decade, so it does not establish a dropping or rising long-term water table. Only 35 wells report static water level, a small subset compared with the total permit file. Ask for a recent measurement on the specific property and compare it with nearby wells when the purchase decision depends on pumping depth or seasonal reliability.
Permit activity has been strongest since the late twentieth century. The records show 150 permits from the 1990s, 96 from the 2000s, 40 from the 1980s, 38 from the 2010s, and 33 from the 2020s. The newest permit year is 2025. Domestic or household wells make up 56% of the use mix; monitoring accounts for 22%, irrigation 8%, and stock 7%.
Shelton Drilling Corporation, listed with Shelton, Wayne, appears most often with 142 records. Collins Drilling Co, listed with Collins, F. E. “Bodie,” appears on 61. Authorized, listed as Pe, Pg, appears on 25. These records show who has worked in the area, not a quality ranking. Confirm current licensing, insurance, references, and the scope of each written bid before hiring.
For the mixed sedimentary and alluvial ground described for Chacra, the planning rate is $50 to $75 per foot. At the 85-foot median depth, the drilled hole calculates to about $4,200 to $6,400. A finished well, including pump, tank, trenching, and electrical, is estimated at about $10,200 to $18,400.
Use those figures as a budgeting range, not a guaranteed contract price. A bid can change with access, casing and grout, hard layers, water-quality requirements, pump depth, electrical distance, and the final well design. Before closing on a lot, ask the driller to separate drilling, casing, development, pump equipment, trenching, electrical work, testing, and permit-related services so you can see what is included.
Low yield is not the main pattern in the reported data, but a good area-wide median cannot rule out a poor hole on one parcel. Fractured-bedrock wells can be unpredictable, and the record includes a wide depth spread. Confirm the permit status, construction report, test yield, static level, pump setting, and water-quality results for the property whenever those documents exist.
Environmental screening also deserves attention. Within about 10 miles, the map shows 79 PFAS sampling or contamination sites and 31 historic mine features. There are no EPA Superfund or cleanup sites mapped in that radius. Those map findings do not prove contamination at a particular well, so arrange laboratory testing and check drainage, mine history, fuel storage, and septic locations. A septic system must fit the lot, groundwater conditions, setbacks, and local approval requirements.
Start with the Colorado Division of Water Resources permit file and identify the well tied to the parcel, not merely the closest mapped point. Then compare nearby New Castle, Glenwood Springs, No Name, Silt, Cattle Creek, and Carbonate records only as local context; conditions can change across short distances. Have a licensed driller inspect access, proposed house placement, septic space, power routing, and the likely drilling location before you commit.
For an existing home, make the purchase contingent on reviewing the well permit, construction report, pump test, water test, and equipment condition. For vacant land, budget from the 85-foot median but keep room for a deeper result and site work. A written feasibility review can uncover access or septic problems before excavation, when changing the building plan is still practical.
| Decade permitted | Wells |
|---|---|
| 1950s | 1 |
| 1960s | 8 |
| 1970s | 34 |
| 1980s | 40 |
| 1990s | 150 |
| 2000s | 96 |
| 2010s | 38 |
| 2020s | 33 |
| Most active drillers on record | Wells |
|---|---|
| Shelton Drilling Corporation (Shelton, Wayne) | 142 |
| Collins Drilling Co (Collins, F. E. "Bodie") | 61 |
| Authorized (Pe, Pg) | 25 |
How this is built: the median permitted depth here times the per-foot range for this ground, plus the normal system costs. A lot at the 75th-percentile depth (160 ft) would run roughly $14,000–$24,000. See the full Colorado well cost guide.
Counts come from EPA, USGS and state datasets layered on the Colorado Well Finder map. A count is not a verdict on any one well; it tells you what to test for.
The numbers above are the area average. Your lot is one point on the map. Search the address to see the real depth, yield and aquifer of each permitted well around it.
Map wells near ChacraTri-Lakes Contracting is a licensed Colorado contractor serving Chacra and nearby Garfield County communities with access driveways, site development, new-build septic systems, and custom homes. Their planning can help coordinate the well, septic, excavation, and home site as one project.
Licensed Colorado custom home builder · licensed driveway & excavation contractor · licensed septic installer
A listing photo can't tell you whether a lot is a dream or a money pit. Two parcels near Chacra can carry the same asking price while one needs an $80,000 driveway and a $45,000 engineered septic the other doesn't. The well numbers on this page are the start of that answer. A Tri-Lakes Site Feasibility Report is the rest of it: a licensed general contractor, excavator and septic installer reads the parcel the way we would if we were about to build on it, and puts the real cost in writing before your money is committed.
Spend a little to know. Or gamble a lot to guess. Realtors sell the view and inspectors look at houses that already exist. We're the people who'd build it, so we catch what quietly turns a "great deal" into a budget disaster: bad access, buried rock, steep grade, soil that won't pass for a normal septic, water that's a fortune to reach. And if the lot is good, you've already got a builder ready to do the work, driveway to drywall.
Under contract, comparing parcels, or a realtor with a rural listing whose buyers keep asking "what will it cost to build here?" This is the due-diligence step almost everyone skips, and the one that saves the most.
Driveway, site work, septic or a build near Chacra. Licensed GC, excavator and septic installer.
Got it. Tri-Lakes will get back to you shortly.
Something went wrong sending that. Email kyle@trilakes.co instead.
The median reported depth near Chacra is 85 feet, with the middle half between 56 and 160 feet. Fifty-eight percent are under 100 feet, while 36% are between 100 and 300 feet. The 90th percentile is 232 feet, so a particular parcel can require substantially more drilling than the local median.
The local planning rate is $50 to $75 per foot. At the 85-foot median depth, the drilled hole is estimated at about $4,200 to $6,400. A finished well with pump, tank, trenching, and electrical is estimated at about $10,200 to $18,400. Access, casing, grout, hard layers, and equipment can change the bid.
Among 95 wells with reported pump yields, the median is 15 gallons per minute and the middle half is 12 to 15 gallons per minute. Sixty-nine percent report more than 15 gallons per minute. These figures describe recorded tests, not a guarantee for a new well, so request a pump test and confirm the permit’s legal use.
The area map shows 79 PFAS sampling or contamination sites and 31 historic mine features within about 10 miles, with no EPA Superfund or cleanup sites mapped there. That does not determine the quality of an individual well. Test the specific water through a qualified laboratory and review nearby land uses, drainage, mine history, and septic locations.
Permit records most often list Shelton Drilling Corporation, with Shelton, Wayne, on 142 records. Collins Drilling Co, listed with Collins, F. E. “Bodie,” appears on 61, and Authorized, listed as Pe, Pg, appears on 25. The records show local permit history, not endorsements, so verify current licensing, insurance, references, and the written scope of work.
All wells in Garfield County — county-wide depth, yield and cost figures.
Driveway, septic, site development, feasibility or a custom build near Chacra.
Shopping a lot? Run the $99 instant buildability check →